Knowledgebase: Miscellaneous
Axe-Fx II Specifications
Posted by Matt Picone on Nov 14, 2012 - 11:19 pm

Axe-Fx II Specifications

Specifications subject to change without notice.

 

FRONT PANEL INPUT

Connector: 1/4” phone jack, unbalanced.

Impedance:  1 MegaOhm (less if Input Impedance is active)

Max. Input Level:  +16 dBu (conditioned for guitar use)

REAR INPUTS

Connector: 1/4” phone jack, balanced.

Impedance:  1 MegaOhm

Max. Input Level:  +20 dBu

A/D CONVERSION

Bit Depth:  24 bits

Sample Rate: 48 kHz

Dynamic Range:  > 110 dB

Frequency Response:  20 – 20kHz, +0 / -1 dB

Crosstalk:  < -60 dB over full bandwidth

ANALOG OUTPUTS

Connectors: 1/4” phone jack unbalanced (hum-canceling), XLR balanced (for main output)

Impedance:  600 ohm

Max Output Level:  +20 dBu

Dynamic Range:  > 110 dB

Frequency Response:  20 – 20kHz, +0 / -1 dB

Crosstalk:  < -60 dB over full bandwidth

DIGITAL I/O

Connectors: RCA Coaxial Type for S/PDIF I/O, XLR for AES I/O

Format: S/PDIF – 24 bit

Sample Rate: 48 kHz fixed

USB Audio Clock  48 kHz fixed

MIDI INTERFACE

Input Connector: 7-pin DIN (pins 6 & 7 connected to phantom power in jack)

Out/Thru Connector: 5-pin DIN

PEDAL INTERFACE

Connector: 1/4” TRS phone jack

Format: Switch: Momentary or Latching; Pedal: 10–100kΩ max, linear taper expression type.

MFC INTERFACE:

Connector: RJ-45 Ethernet/EtherCON

IMPORTANT: Do NOT connect the MFC port to a computer or router/switch/hub! 
This jack is only intended for connection to an MFC MIDI Foot Controller.

PHANTOM POWER:

Connector: Female 2.5mm jack

WARNING: Do NOT connect adapters with a rating higher than 1A (1000ma)

GENERAL

Finish:  Powder coated steel chassis with anodized aluminum faceplate

Display: 160 × 80 dot matrix graphic LCD

Dimensions: 19” × 3.5” × 14.25” (483 × 88 × 362 mm)

Weight: 14.75 lbs  (6.7 kg)

Input Voltage: 100–240 VAC, 47 – 63 Hz (universal input)

Power Consumption: <40 W

Backup Battery Life:  >10 years

Backup Battery Type: CR2450 Lithium

ENVIRONMENTAL

Operating Temperature:  32 to 122 °F (0 to 50 °C)

Storage Temperature:  -22 to 167 °F (-30 to 70 °C)

Humidity:  Max. 90% non-condensing 

 

(4 vote(s))
Helpful
Not helpful

Comments (0)
Help Desk by Kayako